Model Number: LB-MFP20-#9327
Brand Name: Leadboom
Key Specifications/Special Features:
What is laser marking?"Laser marking" stands for marking or labeling of workpieces and materials with a laser beam. In this regard, different processes are distinguished, such as engraving, removing, staining, annealing and foaming. Depending on the material and the quality requirement, each of these procedures has its own advantages and disadvantages.What materials can be marked with a laser?Metals:Stainless steel, aluminum, gold, silver, titanium, bronze, platinum or copper
Plastics:ABS, polycarbonate, polyamide, PMMA or plastics with laser additives
Paints
Foils and films and packaging
Laminates
Depending on the material,different laser typesare used for laser markingBenefits of fiber laser marking
- High-precision marking at constant quality
Thanks to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will turn out clearly legible. At the same time, marking with the laser ensures constant high-quality results.
Laser etching is permanent and at the same time resistant to abrasion, heat and acids. Depending on the laser parameter settings, certain materials can also be marked without damaging the surface.
Laser marking is one of the fastest marking processes available in the market. This results in high productivity and cost benefits during manufacture. Depending on the material structure and size, different laser sources or laser machines can be used to further increase the speed.
- LeadboomLASER machines for laser marking
Leadboom LASER offers you a wide range of flatbed and galvo laser machines for marking a large variety of materials.
Laser marking machine technical parameters
Type LB-MF10LB-MF20LB-MF30
Power 10W20W30W
Beam quality M2≤1.4M2≤1.8M2≤1.8
Marking speed ≤7000mm/s≤8000mm/s≤8000mm/s
Power consumption 0.5KW0.8KW1.2KW
Fiber LaserAO Q-Switch Pulse Fiber Laser
Wavelength 1064nm
Laser marking software EzCad.2.1
Working area 50x50mm-300x300mm
Minimum Linewidth 0.01mm
Repeated precision ±0.001mm
Min characters 0.15mm
Cooling system air-cooling
Location System Red dot indicater
Power supply AC220V/50Hz
Control System Ezcad Motion Control Card-PC
Dynamic Focusing device Yes
Dimension 800x680x1200mm